ShanDong OYADE Hollow Glass Material Co.,Ltd.

Call us toll free:
+86 531 68621929
Home Products SEALANT SERIES TWO COMPONENT POLYSULFIDE SEALANT

Products

TWO COMPONENT POLYSULFIDE SEALANT
TWO COMPONENT POLYSULFIDE SEALANT

TWO COMPONENT POLYSULFIDE SEALANT

Product ID : OYD-3
Product Tags :
Product Attributes :

Two component polysulfide sealant for insulating glassis an elastomeric sealant that has no solvent, has double components, and is solidified at room temperature. It has good cohesive property for materials such as glass,aluminum alloy and galvanized steel.  It is applicable for the manual coating production line of insulating glass.    

Product Description

 Two component polysulfide sealant for insulating glassis an elastomeric sealant that has no solvent, has double
components, and is solidified at room temperature. It has good cohesive property for materials such as glass,
aluminum alloy and galvanized steel. It is applicable for the manual coating production line of insulating glass.    

It can be used together with butyl seal tape (elastomeric sealant) and can also be used singly.     

Characteristics of product:
1.Double components, and solidifying at room temperature
2.Good cohesive property
3.Excellent aging resistant property
4.Do not contain solvent and low boiling point substances, and do not pollute environment
Service application:Mainly used for the seal of insulating glass in architectural, traffic and transportation, refrigerating etc. industries.

 

Main technical indexes:

Ser no.
Item
Technical indexes
1
Appearance
Component A
White, slabby homogeneous cream
White, slabby homogeneous cream
Component BBlack, slabby homogeneous creamBlack, slabby homogeneous cream
2
Viscosity(Pa·s)
Component A180~400
Component B
50~250
3
Shelf life(min)
        ≥15
4
Surface drying time(h)
≤3
5
Droop(mm)
        ≤1
6
Stretching cohesive strength(MPa)
≥0.3
 
7
Sulfurized hardness
(Shore A)
24h
≥20
8
Gluing time(h)
≤72 


Direction for use: face clearing:The surface of adhered material must be clean and dry, and have

no dirt so as to guarantee good cohesive property.


Mixing process:The proportion of component A and B is A:B=100:10 within which the proportion of
component A and B can be adjusted to change the solidifying velocity of elastomeric sealant(The larger
the mass of component B becomes, the rapider the solidifying velocity is; The smaller the mass of
component B becomes,the slower the solidifying velocity is);Mixing should be homogeneous and have

no chromatic aberration.                      

Coating process:one should coat along same direction to prevent air bubble from being wrapped into the

glue and reducing the seal performance of insulating glass.

Cations:Prohibit admix-using with silicon elastomeric sealant, otherwise its cohesive property will be affected.

Construction temperature should be more than 5℃, otherwise its solidifying velocity and cohesive property

will be affected.      


Packaging

ClassificationSpecification
Tierce packagingComponent A: 300kg/bucketComponent B: 30kg/bucket
Small bucket packagingComponent A: 30kg/bucketComponent B:3.6kg/bucket

Transportation: this product is non-dangerous-goods, and can be transported by train, automobile, ship and airplane.

Storage: store 12 months in shady and cool, ventilated and dried place.

Service application
Mainly used for the seal of insulating glass in architectural, traffic and transportation, refrigerating etc. industries.  

Online Inquiry